How much does Koa move?
Koa is one of the more dimensionally stable woods: it moves relatively little with seasonal humidity, which makes it forgiving for wide panels and tabletops.
A 24-inch-wide Koa panel, across the seasons
Going from humid (summer, unconditioned) (about 13% moisture content) to dry (heated interior, winter) (about 6%), a 24-inch-wide Koa panel changes width by roughly:
0.36″
Flatsawn (plain-sawn)
Tangential shrinkage 6.2%
0.32″
Quartersawn
Radial shrinkage 5.5%
Computed with the USDA Forest Products Laboratory dimensional-change formula from published green-to-oven-dry shrinkage figures. Real-world movement varies with your actual humidity range, board width, and how the wood was dried, this is a representative estimate, not a guarantee.
Flatsawn vs. quartersawn Koa
Flatsawn Koa moves about 1.1× as much as quartersawn across its width (tangential shrinkage of 6.2% versus radial 5.5%). That’s why quartersawn stock is prized for tabletops, wide panels, and anything where seasonal movement would cause problems, it moves less and stays flatter. The gap is modest for Koa, so flatsawn stock is often perfectly workable.
Run your own numbers
These figures use a 24-inch panel and a typical seasonal swing. For your exact board width and humidity range, use the interactive calculator, Koa is already loaded with its verified shrinkage data.
Open the wood movement calculator →Managing Koa movement in a build
Wood moves across its width, not its length, so the wider the panel, the more it matters. The classic precautions apply: let the wood acclimate to your shop before building, attach wide tops with fasteners that allow movement (elongated screw holes, buttons, or figure-8 clips), avoid gluing solid panels rigidly across the grain, and account for seasonal swing in fitted parts like drawers and doors. For Koa specifically, its lower movement gives you a little more margin, though the same principles still apply.